LOGO!POWER 24 V / 4 A Miniature Power Supply (6EP3333-6SB00-0AY0) CAN Electric — Industrial Automation Parts Supplier

The standard supply for LOGO! cabinets

This 4 A unit is the largest of the LOGO!Power family and pairs visually and mechanically with LOGO!8 logic modules. The stepped-profile housing is only 53 mm deep, so it fits shallow distribution boards and flush-mounted enclosures where standard SITOP housings are too deep.

Wide-range input, regulated output

The input accepts 85 to 264 V AC and 110 to 300 V DC, tolerating 300 V AC for 1 s. The 24 V output is adjusted between 22.2 and 26.4 V by potentiometer, holds a static tolerance of plus/minus 3%, and rides through mains dips of at least 40 ms at 187 V.

Protected, efficient, quietly cool

A constant-current characteristic limits the output at typ. 5 A, short circuits are endured continuously, and 150% overload is available for typ. 200 ms. At approx. 89% efficiency and max. 0.3 W no-load loss, the unit suits installations that spend long periods in standby.

Data per the Siemens catalogue entry and product documentation; confirm the current data sheet before mounting the module or sizing the 24 V load.

Fits where standard supplies do not

The 72 mm wide, 53 mm deep stepped profile matches the LOGO!8 look and mounts on DIN rail or directly on the wall – the usual choice for flush-mounted distribution boards feeding LOGO! modules, relays and small drives.

Standby-friendly by design

With no-load losses below 0.3 W and high part-load efficiency, installations that idle most of the day waste noticeably less energy than with older miniature supplies.

Two units in parallel when 4 A is not enough

Up to two units can be paralleled for enhanced performance, and the 150% / 200 ms power reserve absorbs capacitive and motor-start inrush without nuisance trips.

All LOGO!Power units share the same wide-range input, stepped-profile housing and certification set; selection is by output voltage and current, from 18 mm 0.6 A up to this 72 mm 4 A flagship.

The supply feeds LOGO! logic modules and small 24 V loads directly from a 1-phase AC or DC network. For larger control cabinets it sits alongside the SITOP PSU6200 range (with diagnostics interface and higher ratings) or the coated SITOP PSU2200 economy units; 24 V availability can be extended with SITOP DC-UPS, redundancy and selectivity modules.

• Email sales@can-electric.com with the order number, quantity, delivery country, and whether the power module equips a new cabinet or replaces a failed unit.
• State the condition you need — new, new-surplus or refurbished is written on the quote, never implied.
• Prices are USD and ships go out from Hong Kong by DHL; availability is confirmed per order rather than taken from a catalogue status.